(2Pk) 3M Scotch-Weld Structural Plastic Adhesive

When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing. Creates a Strong Bond on Low Surface Energy Plastics: Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M Scotch-Weld Structural Plastic Adhesive DP8010 Blue also bonds metals, ceramics, and wood and most other plastics. It is slightly flexible when cured. We also formulate this adhesive with 8 mil spacer beads for bond line spacing. Recommended Applications: Joining plastics to metals, such as in the manufacture or repair of appliances, Bonding low surface energy plastics without priming, Impact resistance composite bonding, Manufacture or repair of various sporting goods equipment, Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs). Our 3M Scotch-Weld Acrylic Adhesive DP8010 starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 10 minute work life. The adhesive reaches handling strength in approximately 1 hour and is fully cured in 8-24 hours (at 72° F /22° C). Easy Adhesion with Acrylic: Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.
 

• KEY SUBSTRATES: Joins a variety of low surface energy plastics, including many grades of Polypropylene, Polyethylene, and TPOs without special surface preparation
• RECOMMENDED APPLICATIONS: Creates long-lasting bonds across the electronics, transportation, and construction industries
• EXTREMELY STRONG: Can replace mechanical fasteners, screws, rivets, and spot welds in many applications
• LESS PREP TIME: Made to function with little to no surface preparation
• AMPLE OPPORTUNITY FOR REPOSITIONING: Offers up to 10 minutes for project readjustment
• FULL CURE TIME: Fully cured in 48 hours at 73 °F (23 °C)
• For industrial/occupational use only. Not for consumer sale or use

Shipping Note: Shipping to Alaska, Hawaii, PO Boxes, and APO addresses is not available for this item

Warranty: 90 Day Woot Limited Warranty